Plant Construction

Plant Construction 1

Plant Construction

For us, plant construction is the precise intermeshing of process engineering know-how, sound planning and structured project management. Tried and tested installation teams, our own commissioning engineers with expert knowledge, who train your employees and familiarise them with the plant, are elementary components of our philosophy. We will not leave you alone even after the project has been completed. We stay in touch via service and maintenance and help you quickly and unbureaucratically in your day-to-day operations.

Plant Construction 2

Whether in modular design, as a container plant or as an individually designed complete plant, we will meet your requirements and combine the most diverse technologies to create a functioning treatment plant. We regard necessary certifications such as the German WHG as a matter of course.

  • Sedimentation and (sand) filtration, de-ironing, demanganisation, desulphurisation
  • Activated carbon filter for dechlorination or removal of trace substances
  • Softening, deacidification, full desalination
  • Ultrafiltration, Nanofiltration and Reverse Osmosis
  • Ion exchange process and EDI
Plant Construction 3

Some case studies of realized plants in the field of water treatment:

Drinking water – ultrafiltration – turnkey plant

Turnkey installation of a waterworks with ultrafiltration membranes

Technology & plant characteristics:

ultrafiltration, membrane surface 4.000 m²
operating pressure 0.3 – 0.6 bar
2 treatment lines
backwashing and chemically assisted CIP cleaning
volume flow: 250 m³/h
Plant Construction 4

Drinking water ultrafiltration container plant

Turnkey construction of a waterworks in the factory on the basis of ultrafiltration membranes

Technology & plant characteristics:

ultrafiltration, membrane area 200 m²
operation pressure 0.2- 0.5 bar
1 treatment line
backwashing and chemically enhanced CIP-cleaning
pressure boosting station 55 m w.c.
volume flow: 15 m³/h
Plant Construction 5

Drinking water – filtration – deironing / manganese removal

Planning, delivery, commissioning of a complete waterworks

Technology & plant characteristics:

plant capacity: approx. 800 m³/h
treatment by oxidation and filtration to remove iron and manganese
pipeline construction in plastics and stainless steel in nominal diameters up to DN 600
disinfection of the system in accordance with the drinking water directive (TVO)
Anlagenbau Wasserwerk

Beverage industry – reverse osmosis – brew water water recycling

Wasserreinigungssystem für die Aufbereitung von Konzentrat aus existierenden Umkehr-Osmoseanlagen

Technology & plant characteristics:

two reverse osmosis units with flushing / CIP cleaning system
recovery 75 %
process requirement: reduction of nitrate content to u0026lt; 10 ppm
total permeate flow rate: 22.5 m³/h
Plant Construction 6

Beverage industry – reverse osmosis brew water boiler feed water

Reverse osmosis plant for brewing water production with variable adjustment of the brewing water quality via blending

Technology & plant characteristics:

reverse osmosis for removing hardness constituents and other salts from ground water
antiscalant dosage with TVO (drinking water directive) approval
free chlorine measurement and bisulfite dosage
system recovery approx. 80%
provision of boiler feed water
stainless steel skid and piping
Plant Construction 7

Beverage industry water degassing modular plant construction

Planning, delivery and commissioning of a frame stand system ready for connection

Technology & plant characteristics:

degassing of 25 hl/h mineral water to u0026lt; 20 ppb oxygen content by membrane degassing
residual oxygen monitoring
Plant Construction 8

University institute process water ultra pure water plant electrodeionisation

Planning, installation and commissioning of an ultra pure water plant for a university institute

Technology & plant characteristics:

double softening plant with hardness control device
reverse osmosis with 75 u0026amp; recovery
electrodeionisation
ultra pure water tank with pressure boosting station
UV system for TOC degradation
ultra pure water quantity: 120 l/h
conductivity: u0026lt; 0.1 µS/cm
TOC: u0026lt; 30 ppb
Plant Construction 9
  • Filtration and conditioning of cooling water
  • Disinfection via UV, peroxide or hypochlorite
  • Ultrafiltration, nanofiltration, reverse osmosis
  • Chemical – physical process water treatment
  • Ultrafiltration, Nanofiltration and Reverse Osmosis
  • Boiler feed & make-up water
  • Circulation systems based on the ion exchanger principle
  • Systems for bath care in surface technology
Anlagenbau

Some case studies of realized plants in the field of process water treatment:

Automotive – process water – reverse osmosis

Production of 5 m³/h demineralised water (permeate) from city water or process water. Use of the permeate as make-up water for the paint shop of the automotive plant.

Technology & plant characteristics:

reverse osmosis plant according to equipment specifications of car manufacturer
Umkehrosmoseanlage Automotive

Automotive – process water – water recycling

Treatment and recycling of wastewater from high-pressure skid cleaning systems at an automobile manufacturer

Technology & plant characteristics:

stepwise fitration via band filter
plant capacity up to 40 m³/h
ingredients: paint residues and waxes
cooling water circuit for the entire process
pressure boosting station for skid cleaning system
Plant Construction 10

Container-plant – process water – water recycling

Complete plant in modular container design with factory test, delivery, installation and commissioning; plant installed in 2 insulated, heated/air-conditioned container modules

Technology & plant characteristics:

treatment stages: wastewater tank (10 m³), precipitation/flocculation with special, non-saline flocculation chemicals, lamella clarifier, pH-adjustment, 2-stage final filtration up to 0.2 µm, clear water tank (10 m³) with pressure boosting system to supply the production, sludge dewatering via belt filter
automatic process water circulation for 5 m³/h
removal of finely dispersed organic and inorganic particles from a process bath in DI water quality
Plant Construction 11

University institute –ultra pure water plant – reverse osmosis – water degassing – mixed bed polisher

Supply, installation and commissioning of a new plant for ultrapure water production for the laboratory

Technology & plant characteristics:

plant capacity 2.6 m³/h
reverse osmosis
UV-disinfection
filtration via activated carbon filter
softening
membrane degassing
UV-disinfection
mixed bed polisher
Plant Construction 12

University hospital – process water DI-water reverse osmosis

Dismantling of old plant, installation and commissioning of a new plant for DI-water production

Technology & plant characteristics:

duplex softening plant
two reverse osmosis units operated in parallel with upstream activated carbon filter
softened water capacity: 2 m³/h
DI-water capacity: 2 x 470 l/h with u0026lt; 10 µS/cm
Plant Construction 13

Automotive – waste water – chemical-physical treatment – process water

Stepwise renewal of a DI & waste water treatment plant for the paint shop with dismantling of the old plant

Technology & plant characteristics:

treatment of waste water containing oil by ultrafiltration: 3 m³/h
3 continuous treatment plants for different partial flows: 25 m³/h, 12 m³/h, 6 m³/h
phosphate-containing waste water: 12 m³/h
2 batch reactors for special waste water: 25 m³ each
sludge treatment using chamber filter presses
Ion exchanger circulation plant: 12 m³/h
DI-water production: 30 m³/h
Plant Construction 14
Plant Construction 15
Plant Construction 16
Plant Construction 17
cs_automotive4
cs_automotive3
cs_automotive2
cs_automotive1
previous arrow
next arrow

Automotive – process water – leak testing (DPA)

Complete delivery, assembly and commissioning of a leak test cabin with spray system and portal dryer as a stand system for final assembled vehicles incl. water treatment at the testing/finishing area for different vehicle types.

Technology & plant characteristics:

3-shift operation / max. 100 vehicles/d
testing water treatment 30 m³/h
contaminants: particles
Plant Construction 18

Automotive – process water – washing and leak testing (WDPA) with conveyor technology

Delivery, assembly and commissioning of a complete washing and leak testing unit with water treatment for separated washing water and leak testing circuits and transport system at the test/finish area for the electric car production

Technology & plant characteristics:

3-shift operation / max. 360 vehicles/d on 2 lines
Plant Construction 19

Automotive – process water – washing and leak testing (WDPA) with conveyor technology

Delivery, assembly and commissioning of a complete washing and leak testing unit with water treatment

Technology & plant characteristics:

belt speed of continuous washing system max. 7 m/min
belt speed for operation and pickup belts each max. 5 m/min
3-shift operation max. 60 vehicles/h continuous washing system
max. 8 vehicles/h portal washing system
max. 7 vehicles/h leak test cabin
water treatment
contaminants: solids, waxes, surfactants
water treatment for washing water: 10 m³/h
water treatment for testing water: 35 m³/h
Plant Construction 20

Chemical industry – process water – cooling water

Supply, installation and commissioning of a cooling water filtration plant / cooling water purification plant

Technology & plant characteristics:

collision-free construction in 3D with old inventory
2 pieces double floor pressure filter (gravel filter)
piping, automatic valves and controls
plant flow rate: 2,000 m³/h
Plant Construction 21
Plant Construction 22
Plant Construction 23
cs_filtration1
cs_filtration2
cs_filtration3
previous arrow
next arrow

Process water – wastewater water recycling – container-plant

Planning and pre-assembly of a complete plant in container module design with factory test, delivery, installation and commissioning: treatment of waste water from the manufacture of medical articles with the aim of reusing the treated water in the production

Technology & plant characteristics:

process stages: chemical/physical pre-treatment, ultrafiltration, reverse osmosis, pure water tank with pressure boosting station and UV disinfection
separate treatment of a CHC-containing partial stream via activated carbon with subsequent discharge into the sewage system
plant capacity: adjustable in the range 1.7 – 4.1 m³/h
Plant Construction 24
Plant Construction 25
Plant Construction 26
cs_recycling1
cs_recycling3
cs_recycling2
previous arrow
next arrow

As a research partner, BWS develops economic processes for the treatment of saline production wastewater with the aim of both water and salt recovery.
The project is funded by the Federal Ministry of Education and Research (BMBF). In the project consortium with leading companies from the chemical and alkali industries, universities, research and analytical institutes, BWS is responsible for the plant construction. According to the research results, BWS will develop and build a pilot plant for OARO (= Osmotic Assisted Reverse Osmosis) and HPNF (= High Pressure Nano Filtration). This is to be used for practical tests in industrially relevant applications. On the basis of these results, BWS will carry out a scale-up including a profitability analysis for technical applications.
In order to achieve the goal of reusing salts and water for subsequent processes, specific parameters must be maintained to ensure product quality and operational safety. This is to be achieved in this project through online-capable process monitoring as well as through automated and intelligent data evaluation using existing analytical modules.
More information about this exciting project? Please visit:

project homepage RIKovery
Plant Construction 27
  • Sedimentation, filtration (sand filter, activated carbon filter etc.)
  • Flotation
  • Chemical-physical processes for (heavy) metal removal
  • Splitting of wastewaters containing hydrocarbons
  • Membrane process for the purification of wastewaters containing mineral oil
  • Biological wastewater treatment: aerobic or anaerobic processes
  • Sludge dewatering via chamber filter presses, belt filters, centrifuges, etc.
  • Ion exchanger process
  • Removal of trace substances
  • Ultrafiltration, nanofiltration, reverse osmosis for further purification of wastewater up to the so-called zero-liquid-discharge (ZLD)
  • Evaporator, Evaporator, Desorber
Anlagenbau

Some case studies of realized plants in the field of wastewater treatment:

Automotive – wastewater – evaporator technology

Treatment of oil-containing waste water, emulsions and washing water from mechanical production, hardening shop and wheel production with oil contents between 1 and 10 %

Technology & plant characteristics:

evaporator system via vapour recompressor
concentration factor between 85 and 95 %
treatment to reach indirect discharge quality with dosing units
capacity: 3.5 m³/h
Verdampfer Automotive

Automotive – wastewater – chemical-physical treatment – ultrafiltration

Refurbishment/renewal of the waste water plant for the paint shop of an automobile manufacturer with dismantling of the old plant

Technology & plant characteristics:

treatment of waste water containing oil by ultrafiltration: 6 m³/h
acid and alkaline waste waters: 25 m³/h
waste waters containing nickel: 20 m³/h
waste waters containing paint: 20 m³/h
sludge treatment with chamber filter press
Plant Construction 28
Plant Construction 29
cs_uf1
cs_uf2
previous arrow
next arrow

Automotive – waste water – chemical-physical treatment – process water

Stepwise renewal of a DI & waste water treatment plant for the paint shop with dismantling of the old plant

Technology & plant characteristics:

treatment of waste water containing oil by ultrafiltration: 3 m³/h
3 continuous treatment plants for different partial flows: 25 m³/h, 12 m³/h, 6 m³/h
phosphate-containing waste water: 12 m³/h
2 batch reactors for special waste water: 25 m³ each
sludge treatment using chamber filter presses
Ion exchanger circulation plant: 12 m³/h
DI-water production: 30 m³/h
Plant Construction 14
Plant Construction 15
Plant Construction 16
Plant Construction 17
cs_automotive4
cs_automotive3
cs_automotive2
cs_automotive1
previous arrow
next arrow

Process water – wastewater water recycling – container-plant

Planning and pre-assembly of a complete plant in container module design with factory test, delivery, installation and commissioning: treatment of waste water from the manufacture of medical articles with the aim of reusing the treated water in the production

Technology & plant characteristics:

process stages: chemical/physical pre-treatment, ultrafiltration, reverse osmosis, pure water tank with pressure boosting station and UV disinfection
separate treatment of a CHC-containing partial stream via activated carbon with subsequent discharge into the sewage system
plant capacity: adjustable in the range 1.7 – 4.1 m³/h
Plant Construction 24
Plant Construction 25
Plant Construction 26
cs_recycling1
cs_recycling3
cs_recycling2
previous arrow
next arrow

Paper industry – wastewater – container-plant biology water recycling

Biological treatment of process waste water from the paper industry

Technology & plant characteristics:

polluted process water is pumped from a sedimentation tank to the biological wastewater treatment plant. There the water is circulated in three reactors and continuously aerated via nozzles. Urea and phosphorus are dosed as nutrients for the microorganisms. From the last reactor, the water runs into a secondary clarifier where sludge and clear water are separated. The treated water is fed back into the process, the sludge is dewatered by a centrifuge and disposed of
contents: paper fibres, organic acids
capacity: 5 m³/h
Plant Construction 37
Plant Construction 38
cs_biologie1
cs_biologie2
previous arrow
next arrow

Life science – wastewater – chemical-physical treatment dissolved air flotation

Engineering, delivery, commissioning of a wastewater treatment plant for wastewater with high COD content

Technology & plant characteristics:

fat separation, dissolved air flotation (DAF), sludge dewatering by decanter, prepared for later aerobic treatment and activated sludge flotation for direct discharge
capacity: 20 m³/h expansion to 800 m³/d planned
Ingredients: fats, lipophilic substances, COD, surfactants, aluminium
Plant Construction 39
Plant Construction 40
Plant Construction 41
cs_DAF2
cs_DAF3
cs_DAF1
previous arrow
next arrow

Automotive – wastewater – chemical-physical treatment – DI-water plant

Engineering, supply, installation and commissioning of a wastewater treatment plant for wastewater from surface finishing

Technology & plant characteristics:

refurbishment of the existing waste water tanks
double batch reactor (2 x 16 m³/h)
2 thickeners (18 m³ each)
2 chamber filter presses built into containers
final treatment via sand filter, selective ion exchanger and final control
chemical storage and dosing
DI-water production (3 m³/h) via reverse osmosis with antiscalant dosing
Plant Construction 42
Plant Construction 43
cs_surface2
cs_surface1
previous arrow
next arrow

Chemical industry – wastewater – chemical-physical treatment

Installation of an adsorption plant for process wastewater containing mercury including on-site commissioning.

Technology & plant characteristics:

inlet buffer and neutralisation tank, sedimentation tank and discharge pump made of HDPE including agitator
dosing station for HCI, booster pump
sand filter, 2 activated carbon filters, ion exchanger
capacity: 5 m³/h
contaminants: mercury
Plant Construction 44

Primary industry – wastewater – chemical-physical treatment – water recycling

Planning, delivery, installation and commissioning of a plant for rainwater retention as well as its treatment and reuse as service water by separating the heavy metal solid particles

Technology & plant characteristics:

three underground structures as pumping stations, each with a maximum capacity of 3,000 m³/h including piping system within a production plant
storage basins with a total of 9,000 m³ capacity
processing plant with a capacity of 5 m³/h including building of a hall
storage tank for service water with 500 m³ capacity
contaminants: mainly copper particles
Plant Construction 45
Plant Construction 46
Plant Construction 47
cs_waterrecycling3
cs_waterrecycling4
cs_waterrecycling5
previous arrow
next arrow

Automotive – wastewater chemical-physical treatment

Retrofitting of 2 reverse osmosis plants for the reduction of COD before discharge into the sewage system after ultrafiltration

Technology & plant characteristics:

wastewater treatment from mechanical production
2 x 4 m³/h
reduction of the COD from approx. 12,000 to u0026lt; 500 mg/l
contaminants: COD, salts
Plant Construction 48
Plant Construction 49
cs_uo2
cs_uo3
previous arrow
next arrow